Română   |   English

 

All Products

CF series - Flange load cells

The flange load cells CF series are fitted at the end of a measuring roller and can precisely detect the result of the forces generated by pulling of the material depending on the winding angles. 
The commercial success of CF load cells is due to the combination of their compact design, which allows them to be easily fitted in narrow spaces, user-friendliness and high reliability, thanks to the high quality achieved by RE in 30 years of business in the sector.

CF flange load cells are available in various models and with a load range of from 50N to 25kN.

 

 

 


 

CK Series - Shaft through load cells

Compact, versatile and reliable, the shaft through load cells CK offer an alternative to the others manufactured by Re and are used for through shaft assembly application.
The CK load cells measure the applied force and give an electric proportional signal, repeatable and free from hysteresys, which can be used for any kind of regulation.
CK shaft through load cells are the product of over 30 years of experience gained in the field of tension regulation.

 

 


 

CB series - base load cells

The CB series is the Re base load cells range. They offer the ideal solution for detecting laminate tension because they can measure it without the influence of other forces such as the weight of the rollers, the supports, etc.
The structure of CB load cells allows the tare to be eliminated mechanically rather than electrically as happens with other types of cells. Plus, they offer high resistance to vibrations and overloads.
CB load cells are applied in particular on paper mill, supercalendering and rolling machines, but also on plants in which laminate must be treated with extreme care and attention.

 


 

LYBRA AMPLIFIER

Lybra is a digital amplifier of the laminate tension detected by load cells. It has just 3 push-buttons for calibration and programming, and a 3-digit display showing the function selected and the value set. Its compact size, user-friendliness and easy installation allow the Lybra amplifier to be considered an extremely flexible piece of equipment, absolutely suitable for load cells of any shape and type.

 


 

PYXIS AMPLIFIER

Pyxis is an analogue amplifier for load cells, microprocessor-controlled, compact and easy to use. It is installed on flexographic, rotogravure, cutting, etc. machines to detect the tension of the laminates. Its HW/HS configuration cuts signal processing times and allows up to four load cells to be connected. Pyxis amplifier has just 3 push-buttons for calibration and programming, and a 3-digit display which at all times shows the function selected or the tensioning value. Both load cell inputs and outputs for connection to your PLC or actuator system can be selected in voltage (mV) or current (mA).

 


 

CP.35 sensor roller

The CP.35 series is Re's cantilever load cell line.
Its specialized design demonstrates Re's experience in designing and manufacturing customized load cells to solve specific application problems.
 

 

 


 

The sensor roller CPF has an high precision in detecting the web tension because both the roller weight and the position of the material on the roller don't affect the reading.
The sensor roller CPF is quickly and easily fixed from one side only; the connector could be installed inside or outside the machine.
Thanks to the special design, the sensor roller can withstandoverloads up to 10 times the maximum load and it is stable to the temperature, pressure and humidity changes.
The sensor roller CPF is available with or without the integrated amplifier and the display on the front of the roller.